Amprobe SOLAR-600 Solar-Analyzer - Manual (Page 37)

30
1. V (5.659V) in red for Y axis;
2. I (767mA) in white for X axis;
3. W (4.342W) in green.
Bedside moving the mouse, users also can use the t and u buttons of the
PC keyboard to move the scale. (but it will work only when the cursor of
the mouse is located inside the curve.)
BEGIN, END, SCAN:
When the cursor of the mouse is located inside the waveform, users can
click the right button of the mouse to select among “BEGIN”, “END” and
“SCAN”.
1. Choose “BEGIN” to set up the current of “SCAN BEGIN” in according to
the present current value.
2. Choose “END” to set up the current of “SCAN END” in according to the
present current value.
3. Choose “SCAN” to set up the range of “SCAN”.
4. The function of selecting among BEGIN, END and SCAN can not be used
if there is no communication between PC and Analyzer.
A.2 Detail data f the Present Sample
Including Vopen, Ishort, Pmax, Vmaxp, Vmaxp, etc.
A.3 The 3 data (V, I, W) of the Present Sample.
A.4 Measurement Status and System time
1. The number of the Present record.
2. The total Sample count.
3. The present time and date of the PC.