Epson 1EMP-S1 - Manual (Page 60)

59
EMP-S1 User’s Guide Appendices > Projector Care
f Replacing the air filter
Replacing the air filter can also be performed when the projector is
mounted to a ceiling.
A Turn off the projector power, wait for the cool-down
period to end, then disconnect the power cable.
Cool-down takes about 20 seconds.
B Put your finger into the recess in the air filter hook,
and lift up the air filter to remove it.
C Replace the air filter with a new one.
Take out the old air filter and install the new one. Please ensure there
are no gaps between the air filter and the plastic grill.
D Replace the air filter cover.
First insert the tabs, and then press down on the opposite side until it
clicks into place.
p Dispose of used air filters properly in accordance with your
local regulations.