Amprobe ACD-55HPQ Clamp-Meter - Manual (Page 28)

ACD-55HPQ
Voltage and Current Harmonics
Harmonic order Resolution [V], [A] Accuracy
1 - 15 0.1 ±(10.0% rdg + 5 dgt)
16 - 25 0.1 ±(15.0% rdg + 5 dgt)
6.1.1. Safety
standards
Comply with: EN 61010
Insulation: Class 2, double reinforced insulation
Pollution: Level 2
For inside use, max height: 2000m
Over voltage: CAT III 600V between terminals and ground
6.1.2. General
data
Mechanical characteristics
Size:
205(L) x 64 (W) x 39(D)mm
Weight (including battery): about 280g
Jaws opening: 30mm
Max conductor size: 30mm
Power supply
Battery type:
2 batteries 1.5V AAA.
Low battery indication: Symbol " " is displayed when battery level is
too low.
Battery life: About 90 hours of continued measurement
Display
Characteristics:
4 dgt LCD with maximum reading 9999 units plus
decimal point and sign.
Sample rate: 64 samples in 20ms
Conversion mode: TRMS
6.2. ENVIRONMENTAL CONDITIONS
6.2.1. Climatic
conditions
Reference temperature: 23° ± 5°C
Operating temperature: 5 - 40 °C
Operating humidity: <80% RH
Storage temperature: -10 - 60 °C
Storage humidity: <80% RH
6.2.2. EMC
This apparatus was designed in accordance with EMC standards in force and its
compatibility has been tested in accordance EN61326 (1997) + A1 (1998) + A2 (2001).
This product conforms to the prescriptions of the European directive on low voltage
73/23/EEC (LVD) and to EMC directive 89/336/EEC, amended by 93/68/EEC.
6.3. ACCESSORIES
6.3.1. Standard
accessories
The accessories contained inside the packaging are the following:
• Instrument
• Rubber holster (MTL-CAP)
• Test leads (MTL-90B)
• Carrying Case (SV-U) • User’s manual
EN - 24