Amprobe ACD-55HPQ Clamp-Meter - Manual (Page 12)

ACD-55HPQ
4.1.3. Rubber cap use to hold test leads
A rubber holster is provided with the instrument. This standard accessory, when fitted on
the top of the clamp, can hold one of the two test leads, as shown in Fig. 3.
Fig. 3: Use of rubber test lead holster
This rubber holster has a very practical use. It allows the user to perform the
measurements with both test leads while, more easily, observing the value on the display
at the same time.
4.1.4. AUTO POWER OFF function
In order to extend the battery life, the clamp switches off 5 minutes after the last rotary
switch or button actuation.
When this function is enabled the symbol is displayed.
To disable this function select OFF position, then rotate the selector to any position while
the
FUNC key is pressed.
Turning the instrument OFF then ON again will re-enable the AUTO POWER OFF
function.
EN - 8