Amprobe ACD-330T Clamp-On-Multimeter - Manual (Page 9)

LCD DISPLAY ILLUSTRATION
1) - : Negative Polarity Annunciator
2) @OFF : Auto Power Off Enabled Annunciator
3) : Low Battery Annunciator
4) DC : Direct Voltage Annunciator
5) AC : Alternating Current or Voltage
Annunciator
6) AUTO : Indicates AUTO range mode Annunciator
7) D Η : Data hold annunciator
8) D Η MAX : Peak Hold annunciator (1 mS response)
9) MAX AVG MIN : Dynamic recording mode, Present Reading
10)
MAX : Maximum reading
11) MIN : Minimum reading
12) AVG : Average reading
13) • ) ) ) : Continuity function annunciator
14) : Diode Measurement
15) kHz : Unit of frequency
16) V : Unit of voltage measurement
17) A : Unit of Current measurement
18) k Ω : Unit of resistance (ohm) measurement
19)
∆
: Zero (delta) mode annunciator
20) 8.8.8.8 : Digital display for A, V, Ω , and diode
21) 8 000 8 000 : Analog bar-graph annunciator
IIIIIIIIIIII with scale indicator
22) - 8.8.8.8 : Digital display for frequency
Figure 2. LCD Display
5