Power-on options special functions instructions – Amprobe ACD-330T Clamp-On-Multimeter User Manual
Page 15
POWER-ON OPTIONS
SPECIAL FUNCTIONS INSTRUCTIONS
SELECTING POWER -ON OPTIONS
Some options can be selected only when you turn the meter on. These power-on options
are listed in Table 2 To select power-on options, press and hold down pushdown while
turning the rotary switch to any ON position. Power-on options remain selected until the
meter is turned off.
This clamp-on multimeter provides the operator with various functions including:
Dynamic Recording
Data Hold
Zero(Relative)
Analog Bargraph
Auto Power Off and Sleep Mode
Disable Auto Power Off
Demonstrate Annunciator of Display
Continuity Function For Ohms Measurement
1 ms Peak Hold
Backlit LCD for easy reading in the dark
OPTION DESCRIPTION
Demonstrate Annunciators
To demonstrate the annunciators, Full annunciators are
displayed. Press any buttons momentarily to exit
demonstrate mode.
Disable auto-poweroff
In general, the auto-power off function turns the meter off if nei-
ther rotary switch nor push button is activated for 15 minutes.
You can disable auto-power off function by this option. When
auto-power off is disabled the meter will stay on continuously.
Auto-power off is auto disable in Dynamic Recording.
Enable "Refresh Data Hold".
Turns off all beeper functions.
PUSH BUTTON
DH
m
MAX
•
MIN
Hz
m
•
)
)
)
Table 2. Power-On Options
11