DE DIETRICH DKD845 - Manual (Page 21)

SYMBOLS DISPLAYED
Following symbols can be displayed on your appliance.
EN 8/ PARTICULAR MESSAGES, INCIDENTS
ERROR TYPE MEANING
WHY WHAT TO DO
SR
Failure warning - There is / are some part(s)
out of order
- Or there is a failure in the
cooling process Call Service for assistance
as soon as possible.
LF
Temperature of the freezer
compartment is not cold
enough This caution will be seen
especially after long term of
power failure. 1. Do not freeze the foods
that are defrosted and use
them quickly.
2. Set the freezer tempera-
ture to colder values or set
the super freeze function
until the compartment gets
to normal.
3.Do not put fresh food until
this failure is off.
LC
Temperature of the refrigera-
tor compartment is not cold
enough Ideal temperature for refrige-
rator is +4°C.
If you see this warning your
foods have risk of spoiling. 1. Set the refrigerator tempe-
rature to colder values or set
the super cooling function
until the compartment gets
to normal.
2. Do not open the door
much until this failure is off.
LF et LC
Temperature of freezer and
refrigerator compartments
are not cold enough This is a combination of LF
and LC error type. You will see this failure when
first starting the appliance. It
will be off after the compart-
ments get normal tempera-
ture.
HC
Refrigerator compartment is
too cold. The food starts to freeze
because the temperature is
too low. 1.Check if the Super Cooling
mode is on.
2. Set the refrigerator tempe-
rature to a highest value.
LO PO
Low voltage When the power supply gets
lower than 170V, the
appliance gets to a security
position. This is not a failure.
This prevents any damages
on the compressor. This
warning will stop as soon as
the voltage gets back to the
required level.
4 42 2