DE DIETRICH DKD845 - Manual (Page 11)

SWITCHING ON THE APPLIANCE
Once the appliance has been connected to the network, if com-
partments are not cold enough, freezer temperature display
shows “LF” and refrigerator temperature display shows “LC”.
Freezer and refrigerator bar graphics are off.
After compartments get to normal temperature; freezer tempera-
ture display shows -16°C and refrigerator temperature display
shows +2°C .
MODE BUTTON
The functions are selected by pressing on the "Mode" button
until the desired function starts to blink.
The function selection sequence is always the same:
1) Economy
2) Super freezing- quick freeze
function
3) Super Cooling
4) Holiday
After the 5th pushing, no func-
tion is selected and no symbol lights.
Information:
When convenient symbol starts to light, symbol will blink 5
times and a beep of confirmation will sound if user does
not push any button within 2 seconds.
SUPER FREEZING MODE
•This function enables you to freeze a large quantity of fresh food
very quickly that cannot fit into the “Speed Freezer “ compart-
ment.
How to use :
Press mode button until Super
Freezing symbol will light.
Symbol will blink 5 times and a
beep of confirmation will sound
if user does not push any but-
ton within 2 seconds.
• Frezer temperature segment will show “SF” during this mode.
• Freezer bar graphic lights will be off.
• 3 hours after being activated, your refrigerator starts giving
signals. This signal tells that the quickfreezer compartment is
ready for the foods to be placed in it. Your refrigerator will give
intermittent beep sounds for 1 minute in every 5 minutes; provi-
ded that the doors are not opened, this signal giving will last 1
hour. When this sound is heard, foods to be frozen must be pla-
ced away from the already frozen ones. When the door of the
freezer or cooler is opened, this signal stops. When your foods
are cooled enough, your refrigerator will automatically go out of
the quick freezing mode. After a period of maximum 24 hours
after the function is activated, the freezing process will be com-
pleted.
• Holiday and Economy modes will not work until Super Freezing
mode finishes.
• Super cooling and Refrigerator temperature adjusting can be
enabled
• Freezer temperature adjusting can be done but will not be
active until super freezing finishes.
To stop the Super Freezing mode:
• Select the Super Freezing symbol thanks to the “Mode” button
• Or the function stops automatically after 24 hours.
• Or when the sensor of the freezing compartment reaches
<-32°C.
SUPER COOLING MODE
This temporarily lowers the refrigerator's temperature to return to
the ideal food conservation temperature as quickly as possible
(prolonged opening of the door, refrigerator being stocked up,
etc.)
How to use :
Press mode button until Super
Cooling symbol will light.
Symbol will blink 5 times and a
beep of confirmation will sound
if user does not push any button
within 2 seconds.
• Refrigerator temperature segment will show “SC” during this
mode.
• Refrigerator bar graphic lights will be off.
• Holiday and Economy modes will not work until Super Cooling
mode finishes.
• Super Freezeing and Freezer temperature adjusting can be
enabled.
• Refrigerator temperature adjusting can be done but will not be
active until Super Cooling finishes.
To stop the Super Cooling mode:
• Select the Super Cooling symbol thanks to the “Mode” button
• Or the function stops automatically after 8 hours.
• Or when the sensor of the refrigerator compartment reaches
<-4°C.
TURBO MODE
“Turbo” mode cannot be selected individually. Turbo symbol will
light when both Super Freezing and Super Cooling modes are
selected.
How to use :
Press mode button until Super
Freezing symbol will light.
Symbol will blink 5 times and a
beep of confirmation will sound
if user does not push any button
within 2 seconds.
Then press again the “Mode”
button until Super Cooling symbol will light. Symbol will blink 5
times and a beep of confirmation will sound if user does not push
any button within 2 seconds.
The two functions are then selected and you will see “Turbo”
symbol which is displayed automatically between Super
Freezing and Super Cooling symbols.
• When “Turbo” mode is on, Frezer temperature segment will
show “SF” and Refrigerator temperature segment will show “SC”
• Freezer and Refrigerator bar graphic lights will be off.
• Holiday and Economy modes will not work until “Turbo” mode
finishes.
• Freezer and Refrigerator temperature’s adjusting can be done
but will not be active until Super Freezing and Super Cooling are
deactivated.
4 ADJUSTING THE APPLIANCE EN
3 32 2