DE DIETRICH DVY430 - Manual (Page 30)

30
● If you are using dishwasher detergent that includes the
rinse aid function, it is necessary to deactivate the inflow of
rinse aid, in order to avoid a double dosage.
Deactivation/activation of the inflow of
rinse aid
(The dishwasher must be switched off)
Factory setting: inflow of rinse aid activated
When the inflow of rinse aid has been deactivated, also
the rinse aid indicator light on the control panel is
automatically deactivated.
1. Press the On/Off push button. The On/Off indicator light
illuminates (setting mode).
If other indicator lights are on (except salt and rinse aid
indicator lights if refilling is needed), this means that a
washing programme has been set. The programme must
be cancelled: press simultaneously the function push
buttons 2 and 3 for about 2 seconds. All the indicator
lights will turn off (except for the On/Off indicator light and
eventually salt and rinse aid indicator lights) indicating that
the set programme has been cancelled and the machine is
now in setting mode.
2. Press simultaneously function push buttons 2 and 3, until
the indicator lights of the function push buttons 1, 2 and 3
start flashing.
3. Press the function push button 2, the indicator lights of
function push buttons 1 and 3 turn off while the indicator
light of the function push button 2 goes on flashing, the
digital display indicates the current setting.
4. To change the setting, press the function push button 2
again, the digital display indicates the new setting.
5. To memorise the operation, switch off the dishwasher by
pressing the On/Off push button or wait about 60 seconds
after which the dishwasher will automatically return to
setting mode.
Inflow of rinse aid deactivated
Inflow of rinse aid activated (factory setting)