Regenerating, Loading the regenerating salt – DE DIETRICH DQC840BE1 User Manual
Page 12
41
EN
8 / LOADING THE REGENERATING SALT
EAU
SEL
A
A
B
B
C
C
Fig. 06
Important :
Use special salt for dishwashers. Never use
table salt or cooking salt as this could damage
the appliance
.
Unscrew and remove the compartment
cap.
Fill the compartment with special
dishwasher salt. Use the funnel supplied with
the dishwasher.
Firmly screw the cap back on.
The first time you fill the compartment
with salt, fill it up to the top with water.
• Determining the
regenerating
salt
level :
This pilot light comes on when the salt needs
refilling. After refilling the light may remain on
until the salt has dissolved. This normally
happens after a cycle has been run, or if the
salt fill is not complete.
C
C
B
B
A
A
Important :
If the salt overflows from the dispenser, remove the excess salt crystals to prevent risk of the
tank rusting and run a Soak programme or, failing this, a short programme (see page 46-47) with no
load in the dishwasher.
Firmly screw the compartment cap back on.
•
Loading the regenerating salt
. (Fig. 06)