DE DIETRICH DQC840BE1 - Manual (Page 10)

39
EN 6 / YOUR DISHWASHER’S SAFETY SYSTEMS
• Door not properly closed
The display flashes if the door is open or not properly closed.
• Programme access block
While a dishwasher programme is running, the buttons are automatically blocked to prevent them
from being pressed accidentally. The dishwasher will automatically unblock at the end of the
programme or you can cancel by holding down the “START/C” button for 3 seconds.
• Anti-overflow safety system
This system automatically activates the drain pump if the water level in the tank is exceptionally high.
• Anti-leak safety system
This system cuts off the water supply if any leakage is detected under the appliance.
• Total safety
The inlet pipe is equipped with a mechanism that directly cuts off the water supply to the tap in case
of leakage.
• Error display
The error code appears on the display. See the table on page 52.
Observation :
After rectifying the error, hold down the “Start/C” button for three seconds to unblock
access..