DE DIETRICH DHD585XE1 - Manual (Page 35)

4/ CLEANING THE HOOD EN
35
Careful maintenance helps guarantee proper operation and good results from an appliance over time.
The hood must be unplugged from the electrical power source, both by unplugging the
appliance from the socket as well as de-activating the breaker, before removing the metal fil-
ters. After cleaning, you must replace the metal filters as outlined in the instructions.
MAINTENANCE HOW TO PROCEED? ACCESSORY PRODUCTS TO USE
External
surfaces and
accessories
Do not use metallic scrubbers,
abrasive products, or hard bru-
shes.
To clean the external surfaces of the
hood and the light housing screen use
only commercially available household
detergents diluted in water. Then rin-
se with clean water and dry with a soft
cloth.
Filter cartri-
dge
After 30 h of operation the keypad will
signal that the filter is saturated by li-
ghting up all of the buttons. Shut off
this message by pressing the timer
switch . To remove the anti-grea-
se grill push the handle toward the
back of the hood and rotate the grill
downward, removing it from its hou-
sing. To replace the grill, do the re-
verse.
To clean the grill, wash it by hand or
in the washing machine. Clean it at
least every two months.
Active
carbon filter
In the recirculation mode, you must
substitute the active carbon filter pe-
riodically. To remove the fibre panel
you must first remove the anti-grea-
se grill and pull the plastic knob on
the panel itself, removing it from its
housing. To replace the active car-
bon filter, do the reverse. Replace
the used carbon filter on an average
of every six months.
To preserve the appliance we advise you to use Clearit maintenance products.
Clearit The experience of
professionals at your service
Clearit offers appropriate professional products and solutions for the day-to-day maintenance of your hou-
sehold appliances and kitchens. You will find these products on sale at your usual retailer together with an
entire line of accessories and complementary products.