Magnetic Products PSPM125C - Manual

Magnetic Products, Inc.
683 Town Center Drive,
Highland, MI 48357
Tel: 248-887-5600
Email: [email protected] • Website: www.mpimagnet.com
Item # PSPM125C, Coarse Pole Optimag Pneumatic
List Price $741.75
Coarse Pole Optimag Pneumatic
The Optimag Pneumatic gripper is a pneumatically switched magnet. It is available in five standard sizes as part of a
modular system. Each size is available with a fine or coarse pole configuration, ensuring maximum clamping power is
made on the minimum thickness materials.
Fail Safee
The Optimag Pneumatic gripper is a pneumatically switched magnet. It is available in five standard sizes as part of a
modular system. Each size is available with a fine or coarse pole configuration, ensuring maximum clamping power is
made on the minimum thickness materials.
Optional Sensing
An optional sensing attachment is available. This unique device sends a signal only when the magnet is in contact with a
component and is energized. This is a key feature for integration into robotics applications.
Fixing
Each magnet has a central M10 x 20 deep fixing hole. This is supported by one anti-rotation hole 0.314" (8mm) diameter x
0.314" (8mm) deep.
Specifications:
• Outer shell material - Aluminum blue anodize finish
• Front working face - Stainless steel with product protection ring
• Air requirements - Only required during switching
• Air pressure - 1.5 bar min - 2 bar max /21-20 psi
• Air connection - 1/8" bsp
• Max operating temp. - 50º C / 122º F
Used for clamping and/or lifting of materials with rough, uneven surfaces. The coarse pole Optimag also provides greater
clamping forces on thicker materials than the fine pole Optimag.
SPECIFICATIONS
Pole Configuration
Coarse
Diameter
4.92 in
Height
3.66 in
Anti Rotation Hole (PCR)
2.165 in
Air Usage
20.7 in³
Min. Sheet Thickness Requ. for Single Part Lifting
0.078 in
Pull on 2mm Plate with 0.1mm Air Gap
213.4 lb
4/22/2014 | Page 1 of 2