Magnetic Products Ceramic Permanent Magnetic Blocks - Manual

Magnetic Products, Inc.
683 Town Center Drive,
Highland, MI 48357
Tel: 248-887-5600
Email: [email protected] • Website: www.mpimagnet.com
Ceramic Permanent Magnetic Blocks
Often called ceramic magnets because they are hard and brittle like porcelain. Ferrite magnets are the most widely used magnet
type because of their low cost of manufacture and high coercive properties. Features: Operate at lower temperatures than cast
alnico magnets - up to 250 degrees C maximum; economical; high coercivity - do not lose their magnetic properties easily; hard
and brittle.
Results 1 - 8 of 8
Item # Size Pull Max. Temperature Weight List Price
N200 1.875 x 0.875 x 0.370 in 3.0 lb up to 250 ºC 3 oz $2.22
N201 4.00 x 4.00 x 0.187 in 4.7 lb up to 250 ºC 13 oz $4.34
N203 4.00 x 4.00 x 0.312 in 7.9 lb up to 250 ºC 1.36 lb $5.06
N204 4.00 x 4.00 x 0.375 in 9.5 lb up to 250 ºC 1.6 lb $5.79
N202 6.00 x 4.00 x 0.250 in 7.7 lb up to 250 ºC 1 lb $8.27
N205 6.00 x 4.00 x 0.500 in 15.5 lb up to 250 ºC 3.25 lb $9.41
N206 6.00 x 4.00 x 0.750 in 23.2 lb up to 250 ºC 4.8 lb $12.72
N207 6.00 x 4.00 x 1.00 in 30.9 lb up to 250 ºC 6.5 lb $14.57
Results 1 - 8 of 8
4/22/2014 | Page 1 of 1