Magnetic Products RE-40302 - Manual

Magnetic Products, Inc.
683 Town Center Drive,
Highland, MI 48357
Tel: 248-887-5600
Email: [email protected] • Website: www.mpimagnet.com
Item # RE-40302, 24V Round Island Pole Electromagnets (RE & SE Series)
List Price $203.00
Application:
MPI's Round and Rectangular Island Pole Electromagnets (RE and SE Series) offer an effective alternative to mechanical holding devices, hooks or chains.
Electromagnets have no moving parts, valves or springs to wear out. MPI Electromagnets offer increased productivity, while decreasing maintenance in automated
parts handling, plate, sheet or bar steel handling, and machine shop operations.
Operation:
MPI's RE and SE Series Electromagnets are "Island Pole" designated. When energized, the magnet's outer edge will produce either a north or south magnetic field to
surround the center pole. This type of magnetic circuit produces a direct, concentrated magnetic field, which is ideal for part hold down and quick, sure positioning.
Standard Features:
• 24" Standard cord length
• Automatic or Manual operated.
• Durable steel construction.
• Copper Wound Coils.
• Normal operating temperature 175ºF / 80ºC
• Temperature range up to 265ºF / 130ºC
Optional Features:
• Mounting locations.
• Selective cord location and length
• Custom designs
Power Supplies:
MPI offers a complete line of power supplies to meet your requirements. MPI power supplies accept either 150 VAC or 230 VAC input and can be ordered with an
optional variable voltage control and/or a timed reverse circuit for quick part release.
Selection:
The effectiveness of electromagnetic lifting is governed by several major factors, including:
• Surface condition of the material and magnet
• Type of ferrous material to be lifted
• Material thickness
• Contact area of magnet
• Surface dimensions of the workload
All MPI Electromagnets have been pull tested using 2" thick flat, clean mild steel. Holding values decrease rapidly when used with rough, dirty, painted or thin surfaces
which cause air gaps. The holding values are maximums and a safety factor of at least two should be used. For safe application of an electromagnet application, de-
rate the listed pull values by 50%.
MPI Round and Rectangular Island Pole Electromagnets (RE and SE Series) are an excellent alternative to mechanical holding devices, hooks or chains. With no
moving parts to wear out, MPI Electromagnets increase productivity, while decreasing maintenance in automated parts handling, machine shop operations, and plate,
sheet or bar steel handling. For safe RE and SE application use, pull values should be de-rated by 50%.
Need a different size? Request Information.
4/22/2014 | Page 1 of 2