Electrolux EW 1418 1 - Manual (Page 7)

7
Handwash programmes, the Energy saving
programmes (E60° and E40°, 40°-60° Mix), Daily
programmes (60°
and 40° ) and not in
combination with INTENSIVE option.
7 “Sensitive” button
By depressing this button the washing intensity will be
reduced. The machine adds one rinse in the programmes
for Cotton and Synthetics. This option cannot be used
with “Delicates” and “40°-
” (Easy Iron), Wool and
Handwash programmes.
This option is recommended for non fast coloureds
items.
7 “Night cycle” button
When you choose this option, the machine will not
drain the water of the last rinse, so as not to crease the
laundry.
As all spinning phases are suppressed, this washing
cycle is very quiet and it can be selected at night or in
times with a more economical power rate.
On cotton and synthetic programmes the rinses will be
performed with more water.
To complete the cycle, choose one of the following
programmes:
• Drain
To drain the water select Drain programme by means of
the selector dial, then press the Start/Pause button.
• Spin
To spin the laundry choose “Spin” or “Delicate Spin”
programmes by means of the selector dial; select spin
speed by means of Spin speed button and then press the
Start/Pause button.
Important!
Before choosing the programmes Drain, Spin or
Delicate Spin, the selector dial has to be positioned on
“Off” position.
9 “Intensive” button
This option can be selected for heavily soiled laundry.
If you depress this button the washing intensity will be
increased and the washing time will be prolonged by
few minutes depending on the selected type of fabric.
This option can be selected with all cottons and
synthetic programmes but cannot be selected with the
Energy saving programmes E60° and E40°, Daily
programmes (60°
and 40° ) and 40°-60° Mix and
not in combiantion with QUICK WASH option.
10 “Delay start” button
The wash programme can be delayed from 30 min - 60
min - 90 min, 2 hours and then by 1 hour up to a
maximum of 23 hours by means of this button.
Selecting the delayed start
●
Select the programme and the required options.
●
Select the delay start.
●
Depress START PAUSE button: the machine starts
its countdown.
The programme will start after the selected delay has
expired. The DELAY START cannot be used with
D
RAIN , SPIN or D ELICATE S PIN programmes.
Cancelling the delayed start (after you have already
pressed the Start/Pause button)
●
Depress START PAUSE button.
●
Depress DELAY START button until « 00 ’’ » is
displayed.
●
Depress START PAUSE button again, if you wish to
restart the machine immediately.
11 START/PAUSE button
This button has two functions: Start - Pause
Start
After having selected the required programme, press this
button to start the machine; the corresponding pilot light
stops flashing.
If you have selected the delayed start, the machine
begins its countdown. The duration of the programme or
the delay appears on the display.
Pause
To interrupt a programme which is running, depress the
START PAUSE button: the corresponding pilot light
starts to flash.
To restart the programme from the point at which it was
interrupted, press the START PAUSE button again.
12 Display
The display shows the following information:
Reset/Cancelling - Duration of the programme -
Delayed start - Incorrect option selection - Alarm
code - End of programme.
13294920.qxd 30/11/2005 11:22 Pagina 7 (Nero/Process Black pellicola)