beautypg.com

Select the spin speed or rinse hold option, Select the required options, Select the delay start – Electrolux EW 1418 1 User Manual

Page 12: Start the programme, At the end of the programme

background image

12

5. Select the SPIN speed or RINSE

HOLD option

Depress the spin speed button to choose the required
speed or Rinse Hold option

: the corresponding

light comes on.

6. Select the required options

The light corresponding to the depressed button
illuminates.

7. Select the DELAY START

To delay starting of the programme, press the “Delay
start
” button. The figures corresponding to the selected
delay will be displayed for about 3 seconds, after which
the duration of the selected programme will appear on
the display.

During this period it is possible to load other laundry:

depress START PAUSE button;

load the laundry;

close the door and depress START PAUSE button
again.

Delay

start

Prewash Quick

wash

Night

Cicle

Intensive

Sensitive

Spin

speed

1400
1200

900
700

8. Start the programme

To start the selected programme, press the Start/Pause
button; the corresponding light stops flashing and the
pilot light corresponding to the wash phase which is
running is illuminates.
The machine starts operating. If a delayed start has been
selected, the countdown will start.

8. At the end of the programme

The machine stops automatically. The display shows a
blinking zero.
If the Rinse Hold

or Night Cycle option has been

selected, the door will be locked, the light of the
Start/Pause button goes out, the Rinse Hold and
End” lights in the programme progress display remain
lit to indicate that the water must be drained before
opening the door. The display shows a flashing zero.

To empty out the water you can, after turning the
programme selector dial to Off position:

select programme Drain, the water is emptied out
without spinning

select programme Spin or Delicate Spin. Select the
spin speed by means of the relevant button and then
depress the Start/Pause button. The water is emptied
out and the laundry is spun at the selected spin speed.

At the end of the cycle, the light of the Start/Pause
button goes out, and the End light illuminates. The door
can be opened.
Turn the programme selector dial to Off (Reset).
Switch the machine off by pressing the ON/OFF button.
Remove the laundry from the drum and carefully check
that the drum is empty so as to avoid any forgotten
items being damaged in a subsequent wash (e.g.
shrinking) or their colour running into a load of whites.
If you do not intend to carry out another wash, close the
water tap.
Leave the door open to prevent the formation of mildew
and unpleasant smells.

Start/

Pause

13294920.qxd 30/11/2005 11:22 Pagina 12 (Nero/Process Black pellicola)