EVGA force 132-YW-E178 - Manual (Page 14)

EVGA 4
2-Port SATA Power Cable (Qty Three)
Allows a Molex power connector to adapt to a SATA
power connector
1394 Cable
Provides two additional 1394 ports to either the front or
back panels of the chassis.
USB 2.0 4-Port Cable
Provides four additional USB ports to either the front or
back panels of the chassis.
SATA Signal Cable (Qty Six)
Used to support the Serial ATA protocol and each one
connects a single drive to the motherboard
Serial Port Bracket Cable
Used for serial legacy devices
IDE-ATA 133 HDD Cable
Passes data between the IDE connection on both the
Motherboard and IDE device
EVGA nForce 780i SLI FTW
Motherboard
The EVGA nForce 780i SLI FTW motherboard with the NVIDIA nForce 780i SLI SPP and
MCP processor is a PCI Express, SLI-ready motherboard. Figure 1 shows the motherboard
and Figures 2 shows the back panel connectors.