Whelen 90029 User Manual
Aviation, Engineering company inc, Specifications
Page 1
RECOGNITION LIGHT (COMPLETE)
P/N 01-0770453-01
#8-32 x 3/8
PHILLIPS PHMS S.S.
P/N 14-0050504-43
#6-32 x 1/2“ PHILLIPS FHMS P/N 14-0050508-30
MTG. BRKT. POSITION LIGHT
P/N 07-790064-001
MTG. BRKT. POSITION LIGHT
(OPP.) P/N 07-790034-001
POWER SUPPLY
REPLACEMENT
P/N 01-0790120-00
#8-32 x 3/8
PHILLIPS PHMS S.S.
P/N14-0050504-43
STROBE LIGHT HEAD
P/N 01-0790028-01
STROBE LIGHT MOUNT
PN/ 07-790035-002
18 GA. WHITE
TEFLON WIRE, 5“
P/N 67-20118990-50
AMP. 2
POSITION HSG.
P/N 39-0402023-04
AMP. 3
POSITION HSG.
P/N 39-0403023-04
REFLECTOR
LAMP ASS’Y. (28V)
P/N 02-0330310-02
PIN (AMP)
P/N 39-0501316-04
CONNECTOR-2 PIN
(AMP#1-480319-0)
P/N 39-0402313-04
#10-32 X 3/8
PHILLIPS TRUSS HEAD
P/N 14-102316-060
RECOGNITION
LIGHT MTG.
BRACKET
P/N 07-250188-000
#10-32 SELF
LOCKING HEX NUT
P/N 13-0050562-30
CLAMP RING (QTY. 2)
P/N 19-250141-000
#4-40 SELF LOCKING NUT
P/N 13-0050517-04
#4-40 X 3/8 PHILLIPS PHMS
P/N 14-0050505-15
LENS-CLEAR
P/N 68-3230260-00
BASE PLATE (WHITE)
P/N 54-590021-000
BASE PLATE (BLACK)
P/N 54-690021-000
GLASS DOME
(GREEN)
P/N W1284G
(RED)
P/N W1284R
LAMP SOCKET
ASS’Y. (WHITE)
P/N 02-0350102-03
W1290 - 28V BULB
P/N 34-0428020-65
DOME GASKET
38-0230021-00
1
2
3
4
5
POS. LIGHT
RECOG. LIGHT
STROBE LIGHT
POWER
SUPPLY
QUICK
DISCONNECT
INTERNAL
SCHEMATIC
205841-1
CONNECTOR
(REF)
+( )VDC
14 or 28
(AS APPLICABLE)
+( )VDC
14 or 28
(AS APPLICABLE)
14 or 28 VDC
SYNC WIRE
GROUND
V
7-10V
2V
SEC
2
M
CC
®
ENGINEERING COMPANY INC.
Route 145, Winthrop Road,
Chester, Connecticut 06412
Phone: (860) 526-9504
Fax: (860) 526-2009
Internet: www.whelen.com
Sales/Service e-mail: [email protected]
Aviation
Combination Light Assembly
Model 90029 - ( )
©1997 Whelen Engineering Company Inc.
Form No. 13285B (011005)
90029 - ( ) Combination Light
Assembly
(FAA-PMA APPROVED)
The 90029-( ) light assembly is an integral
unit that contains a power supply, strobe
light, recognition light and a position light.
Specifications:
Power Consumption: 26 Watt Position
Light, 35 Watt Recognition Light 1.5 amps
for power supply.
Dimensions:
Height: 6-3/8”
Width: 3-3/8”
Length: 10-1/4”
Weight: 2.5 lbs.