Electrolux 2573-4 KA - Manual (Page 11)

11
Starting up and temperature regulation
• Insert the plug of the connection lead into the plug socket with pro-
tective earth contact. Turn the thermostat knob (B), clockwise,
beyond the «O»(STOP) position. The pilot light (A) will light up, indi-
cating that the appliance is in operation.
Setting „0“ means: Off.
Setting „1“ means: Hightest temperature, (warmest setting).
Setting „4“ (end-stop) means: Lowest temperature, (coldest set-
ting).
However, the exact setting should be chosen keeping in the mind that
the temperature inside the refrigerator depends on:
-the quantity of food stored
-how often the door is opened
Important!
High ambient temperatures (e.g. on hot summer days) and a cold set-
ting on the temperature regulator (position"5" to "6") can cause the
compressor to run continuously.
If this happens, turn the temperature regulator back to a warmer set-
ting (position "3" to "4"). At this setting the compressor will be switched
on and off as usual and automatic defrosting recommenced.
Control panel
A B
4
3 2
1
0
A- Mains control light
B- Thermostat button (Temperature selector)