EverFocus EDSR-400 - Manual (Page 12)

LEDs: LEDs for HDD1, HDD2 , ALARM and LAN access (from left to right).
IR Remote Controller receiver
7
Display: Press this key to switch ON/OFF for camera title, date/time and HDD status.
Hold this key longer than 2 seconds for displaying the event log list.
9
10 Compact Flash Card Slot: Insert a Compact Flash Card for archiving video.
Hard Disk Trays: 2 x Hard Disk holder for 3.5” HDD. 11
12 HDD locks: Turn on HDD power and protection from taking out the HDD without authority.
13 REC: Press this key to start recording.
14 STOP: Press this key to stop recording or playing back.
15 PLAY: Press this key to stat playing back recoded picture (Please refer to page 27 for details).
16 PAUSE: Press this key to pause the playback picture.
17 SEARCH: Press this key to enter the Search Menu (Please refer page 28~30 for details).
18 COPY: Under PAUSE or PLAYBACK, Press this key to start copying still picture or video
stream into Compact Flash card (Please refer page 31~33 for details).
19 ENTER: Press this key to enter sub-menu or confirm setup. When there is Alarm, Motion
or Video Loss occurs, press this key for alarm reset. The Event Log Dialog will show on
the display, then follow the instruction to continue.
20
21
22 LCD Panel: To display Date/Time, Recording/Playback and HDD status.
Front Panel Keypads
In Full screen mode this menu allows color adjustment for each video channel, all channels
are separately adjustable.
The selected item will show in red color bar. Use JOG to increase or decrease the value.
Press ENTER to confirm and move to next item. After finished setting, press SELECT key to
discard change or press MENU key to save and exit the dialog.
In Multi-screen mode:
In Multi-screen mode the SELECT key allows to define cameras in all multi-screen views.
Press SELECT. At the upper left camera in multi-screen appears “SELECT”.
Use the numeric camera keys (1~6) to select a camera.
Press ENTER to switch in the multi-screen.
Press SELECT to exit this setting.
Note: Every camera can be selected only once for a multi-screen view.
Note: If the password is “ENABLE”, hold “SELECT” button for approximately 2
seconds to logout the system (Return to Level 1).