Purdy Plastic Filter Assemblies User Manual
Plastic filter assemblies
Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085
4/3/05
Tel: 408.523.8200 • Fax: 408.733.1287 • [email protected] •
www.purdyelectronics.com
1
.
Plastic Filter Assemblies
These assemblies consist of a finger guard, foam filter and retainer. The guards and retainer are manufactured using
high impact plastics which all meet UL94-V0 flammability requirements. The foam filter assembly is manufactured to
meet UL94MF1, smoke generation requirements. These assemblies are designed to remove contaminants and dust
particles, when used with 40mm - 60mm - 80mm - 92mm -120mm -162mm tubeaxial cooling fans. Filter media comes in
45 PPI. These cost effective designs allow for easy filter replacement, without removing the fan or any mounting
hardware. The guard portion of each design conforms to 1/4" plug gauge test requirements, for added safety.
Part No.
Fan Compatability
Component
A
B
C
40FP-45
40 mm
Retainer
1.57 in.
1.26 in.
.24 in.
Filter
1.57 in.
1.26 in.
.24 in.
Guard
40.0 mm
32.0 mm
6.1 mm
60FP-45
60 mm
Retainer
2.36 in.
1.97 in.
.26 in.
Filter
2.36 in.
1.97 in.
.26 in.
Guard
60.0mm 50.0mm 6.6mm
Plastic Filter Assemblies
Guard
Filter
Retainer
Guard
Filter
Retainer
Part No.
Fan Compatability
Component
A
B
C
80FP-45
80 mm
Retainer
3.29 in.
2.81 in.
.39 in.
Filter
3.29 in.
2.81 in.
.39 in.
Guard
83.5 mm
71.4 mm
9.9 mm
92FP-45
92mm
Retainer
3.77 in.
3.25 in.
.40 in.
Filter
3.77 in.
3.25 in.
.40 in.
Guard
95.8 mm
82.6 mm
10.2 mm
120FP-45
120mm
Retainer
4.88 in.
4.13 in.
.44 in.
Filter
4.88 in.
4.13 in.
.44 in.
Guard
122.0 mm
104.9 mm
11.2 mm