Purdy AND-TFT-64PA-DHB - Manual

Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085
7-28-99 Tel: 408.523.8200 • Fax: 408.733.1287 • [email protected] • www.purdyelectronics.com 1
AND-TFT-64PA-DHB
320 x 234 Pixels
LCD Color Monitor
The AND-TFT-64PA-DHB is a compact full color TFT LCD
module, that is suitable for applications such as a car TV,
portable DCD, GPS, multimedia applications and other AV
equipment. This device consists of a twisted nematic (TN)
liquid crystal cell, that incorporates a TFT-array that has
320 x 234 pixels on a 6.4 inch diagonal screen, X and Y
drivers, an LSI controller, and a built-in CCFL backlight and
inverter (with optional board.)
Features
• 6.4 inch (16 cm) diagonal screen
• Compatible with NTSC & PAL system
• Accepts VGA Input (Analog RGB)
• High brightness CCFL backlight (300 Nits)
• Slim and compact
• Operating temperature range -10 to 60° C
• Storage temperature range -30 to 80° C
• 12V single power supply (with optional board)
• RoHS compliant
Mechanical Characteristics
Absolute Maximum Rating
Item Specification Unit
Screen Size 6.4 inch (16 cm) diagonal inch
Surface Treatment Anti-Glare + WV film –
Display
Format
320 (W) x 234 (H) dot
Active Area 129.6 (W) x97.34 (H) mm
Dot Pitch 0.135 (W) x 0.416 (H) mm
Pixel Configuration Stripe –
Outline
Dimensions 156.3 typ. (W) x 120 (H)
x 14.3 typ (D)
mm
Weight TBD ± 10 g
Item Symbol Conditions
Absolute Maximum
Rating Unit
Min. Max.
Supply Voltage for Source Driver
Analog V
CC
– -0.3 +7.0
V
Digital V
DD
-0.3 +7.0
Supply Voltage for Gate Driver
Positive V
GH
– -0.3 +45 V
Negative V
GL
– -23 +0.3 V
V
GH
V
GL
+15 +40 V
Analog input voltage (V
R
, V
G
, V
B
) V
DD
– -0.3 +7.3 V
Digital input signals –
HSY, POLC, CSY, VSY, CLKC
PSI, COMPS, VIY
-0.5 +5.5 V
Digital output signals – -0.5 +5.5 V
Storage Temperature – – -30 +80 °C
Operation Temperature
(defines that contrast, response time & other display
optical characteristics are Ta=+25.)
– – -20 +70 °C
Product specifications contained herein may be changed without prior notice.
It is therefore advisable to contact Purdy Electronics before proceeding with the design of equipment incorporating this product.