Purdy AND-TFT-5PA - Manual (Page 2)

AND-TFT-5PA*
Displays
Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085
05/13/03 Tel: 408.523.8200 • Fax: 408.733.1287 • [email protected] • www.purdyelectronics.com 2
Power Consumption (Ta = 25°C)
Recommended Operating Conditions (Driving for TFT-LCD Panel) GND = OV, Ta = 25°C
Optical Specifications (Ta = 25°C)
Item Symbol Conditions
Specifications
Units
Min. Typ. Max.
Supply Current for Gate Driver Hi level I
GH
V
GH
= +17V 0.15 – 0.20 mA
Low level I
GL
V
GL
= -15V -10.0 – -15.0 mA
Supply Current for Source Driver I
CC
V
CC
= +5V 17.0 – 20.0 mA
Supply Voltage for Controller I
DD
V
DD
= +5V 43.0 – 48.0 mA
LCD Panel Power Consumption (Note 1) – – 0.45 – 0.57 W
Backlight lamp Power Consumption (Note 2) – – 2.40 – 2.90 W
Item Symbol
Specifications
Unit
Min. Typ. Max.
Supply Voltage for Source Driver
Analog V
CC
4.5 5.0 5.5
V
Logic V
DD
4.5 5.0 5.5
Supply Voltage for Gate Driver
H Level V
GH
+15 +17 +19
V
L Level V
GL
-16 -15 -14
Supply Voltage for Controller V
DD
4.5 5.0 5.5 V
R, G, B Signal Level Level – 0.3 – 4.8 V
Digital Input Voltage
H Level V
IH
0.7 V
DD
– V
DD
V
L Level V
IL
-0.3 – 0.3 V
DD
Digital Output Voltage
H Level V
OH
0.7 V
DD
– V
DD
V
L Level V
OL
-0.3 – 0.3 V
DD
Note 1: The power consumption for backlight is not included
Note 2: Backlight lamp power consumption is calculated by I
L
x V
L
.