Purdy AND-TFT-5PA - Manual

Displays
Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085
05/13/03 Tel: 408.523.8200 • Fax: 408.733.1287 • [email protected] • www.purdyelectronics.com 1
AND-TFT-5PA*
320 x 234 Pixels
LCD Color Monitor
The AND-TFT-5PA is a compact full color TFT LCD module,
whose driving board is capable of converting composite
video signals to the proper interface of LCD panel and is
suitable for security, car TV, portable DVD and GPS
applications. It can accept NTSC & PAL video signal input.
This device consists of a twisted nematic (TN) liquid crystal
cell, that incorporates a TFT-array that has 320 x 234 pixels
on a 5 inch diagonal screen, X and Y drivers, an LSI
controller, and a built-in CCFL backlight and inverter (with
optional board.)
Features
• Compatible with NTSC and PAL system
• Pixel in stripe configuration
• 5 inch (13 cm) diagonal screen
• High brightness CCFL backlight (400 Nits)
• Slim and compact
• Vcom Toggle
• Imager Reversion: Up/Down and Left/Righ t
• 1/4 VGA resolution
• High performance, low consumption
• RoHS compliant
*ALSO AVAILABLE:
AND-TFT-5PA-DHB
(high bright backlight installed- 500
nits)
Mechanical Characteristics
Absolute Maximum Rating (GND = 0V, Ta = 25°C)
Item Specification Unit
Screen Size 5 inch (13 cm) diagonal
Outline
Dimensions
127.4 (W) x 92.8 (H) x 12.9 (D)(typ.) mm
Active Area 102.72 (W) x 74.53 (H) mm
Drive System
a-Si TFT Active matrix, a line at a
time Non-Interlace Drive
Weight 160 ± 10 g
Sub Pixel
Arrangement
stripe –
Pixel Pitch 0.107 (W) x 0.319 (H) mm
Display
Format
960 x 234 dot
Item Symbol Remarks
Absolute Maximum
Rating Unit
Min. Max.
Supply Voltage for Source Driver
V
CC
-0.5 7
V
V
DD
-0.5 7
Supply Voltage for Gate
Driver
V
GH-
V
GL
-0.3 40
V H Level V
GH
0 40
L Level V
GL
-20 0
Analog Signal Input Level V
R,
V
G,
V
B
-0.3 7.0 V
Digital Input Signals HSY, CSY, VSY, CKC -0.3 5.5 V
Digital Output Signals HSY, VSY, PSI, PSC -0.3 5.5 V
Storage Temperature -30 +80 °C
Operation Temperature -20 +70 °C
Product specifications contained herein may be changed without prior notice.
It is therefore advisable to contact Purdy Electronics before proceeding with the design of equipment incorporating this product.