Purdy ANDpSi089C362S-4HB - Manual (Page 4)

Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085
4 Tel: 408.523.8216 • Fax: 408.733.1287 • [email protected] 1/28/08
www.purdyelectronics.com
Displays
Notes:
Refer to “Timing Chart” below. If NCLK is fixed to “H” or “L” level for certain period while VDD is supplied, the panel may be damaged. Please adjust
LCD operating signal timing and FL driving frequency, to optimized the display quality. There is a possibility that flicker is observed by the interference
of LCD operating signal firing and FL driving condition (especially driving frequency), even if the condition satisfied above timing specifications. Do
not make tv, tvhd and tvds fluctuate. If tv, tvhd, and tvds are fluctuating, the panel displays black. In case of using the long frame period, the deteriora-
tion of display quality, noise, etc., may be occurring. NCLK count of each Horizontal Scanning Time should always be the same. V-Blanking period
should be “
n ” X “Horizontal Scanning Time”. ( n :integer) Frame period should always be the same.
Timing Chart
Timing Specifications (see Notes below)
Signal Item Symbol Min Typ Max Unit
NCLK
Frame Period ts 19.0 19.84 – ns
Frequency 1/ts – 50.4 52.6 MHz
high Time tsh 6 – – ns
Low Time tsl 7 – – ns
HSYNC
Setup to NCLK tls 7 – – ns
Pulse Width tlw 8 x ts – – –
VSYNC
Pulse Width tfw 3 x tlpd – 7 x tlpd –
VSYNC to DATA tfd 7 x tlpd – – –
Setup to HSYNC tfl 16 – – ns
–
Line Period tlpd=tlpl
1320 x ts
25.08
1344 x ts
26.67
1344 x ts –
µ s
Horizontal Display Time thd 1024 x ts 1024 x ts 1024 x ts –
–
Frame Frequency 1/tfpd 56 60 – Hz
Frame Period tfpd=tfpf 610 x tlpd 625 x tlpd 635 x tlpd –
Vertical Display Time tvd 600 x tlpd 600 x tlpd 600 x tlpd –
DATA
Setup tds 5 – – ns
Hold tdh 7 – – ns
DE
Setup tdrs 10 – – ns
Hold tdrh 10 – – ns
Display Start tdrds – – 400 x ts –
ANDpSi089C362S-4HB