Purdy AND104X02-HB - Manual

Displays
Purdy Electronics Corporation • 755 North Pastoria Avenue • Sunnyvale, CA 94085-2918
Tel: 408-523-8200 • Fax: 408-733-1287 • [email protected] • www.purdyelectronics.com
01/13/13 1
AND104X02-HB
Color Active Matrix TFT LCD Module
AND104X02-HB
Color Active Matrix TFT LCD Module
The AND104X02-HP is a 10.4” AFFS+ TFT-LCD is a color active matrix TFT
LCD module using amorphous silicon TFT’s (Thin Film Transistors) as active
switching devices. This module has a 10.4 inch diagonally measured active
area with XGA resolutions (1024 horizontal by 768 vertical pixel array). Each
pixel is divided into RED, GREEN, BLUE dots which are arranged in vertical
stripe and this module can display 262,144 colors. The TFT-LCD panel used
for this module is a low reflection and higher color type.
Features
• 1 Ch LVDS Interface with 1 pixel/clock
• 6-bit color depth, Display 262,144 colors
• High luminance and contrast ratio, low reflection and wide viewing angle
• Front Mounting Frame
• DE (Data Enable) mode only
• SLG (Single Level Gate) function use
• SMD LED Array
• Onboard EDID
• ROHS Compliant
Applications
• Pen Type and Tablet PC
Mechanical Characteristics
Item Standard Value Unit
Active Area 210.432 x 157.824 mm
Number of Pixels 1024 (H) x 768 (V) pixels
Pixel Pitch 0.2055 (H) x 0.205 (V) mm
Pixel Arrangement RGB Vertical Stripe —
Display Colors 262,144 colors
Display Mode Normally Black
Dimensional Outline 238.6 ±0.5 (H) x 173.2 ±0.5 (V) x 4.3 max
LCM Height: 4.3mm max (LED), 6.8 mm max (Component)
mm
Weight 210 Typ. / 220 Max. gram
Backlight SMD LED Array
Surface Treatment Anti-Glare
.
Absolute Maximum Ratings
Item Symbol Min. Max. Unit
Logic Power Supply (Ta = 25 ± 2 ºC) VDD VSS-0.3 4.0 V
Logic Input Voltage VIN VSS-0.3 VDD + 0.3 V
Backlight Power Supply Voltage HVDD -0.3 40 V
Backlight LED Current (25 ºC) ILED — 30 mA
Backlight LED Current (50 ºC) ILED — 20 mA
Backlight LED Reverse Voltage VR — 5 V
Operating Temperature TOP -20 +70 ºC
Product specifications contained herein may be changed without prior notice. It is therefore advisable to contact Purdy Electronics
before proceeding with the design of equipment incorporating this product.