Emerson KF240PRZ00 - Manual (Page 4)

4
p. One loose parts bag containing:
1. Two 8-32 x 1-1/4” threaded studs
2. Two knurled knobs
3. Two lockwashers
4. Seven wire connectors
5. One clevis pin/hairpin clip
assembly
6. Eleven 1/4-20 x 13mm oval head
screws
7. Sixteen 10-24 x 8mm truss head
screws
8. Sixteen flat washers
9. One 1/8-27 nut
10. One metal washer
11. One rubber washer
12. One hex wrench
NOTE: Place the parts from the loose
parts bags in a small container to keep
them from being lost.
2. Remove the fan motor and housing
assembly from the protective plastic
bag. Place the fan assembly into the
lower foam pad with the bottom of the
motor facing up.
The lower foam pad serves as a holder
for the fan during the first stages of
assembly.
A
C
F
E
J H
G
K N
M
L
O
P
D
HI
MED
LOW
FAN OFF
LIGHT
ON OFF
EMERSON
O
1 2 3 4
ON
B
I
BP7308 LORRAINE KF240 2/15/06 3:21 PM Page 4