Epson WorkForce RP-310 - Manual (Page 11)

Page - 10-
Paper low detect (? 1)
SW FUNCTIONS ON OFF
6 Paper Low Detect Do not Detect
(? 1) The detecting function of [Paper Low] is an option.
Please set Dip Switch (2-6) [OFF] if you don ’t need any option.
If Dip Switch is [ON] without any special option purpose. Printer detects
[Paper is Low] and it could cause error.
2-4-2. Parallel Interface Specification
DIP Switch Set 1 Functions
SW FUNCTIONS ON OFF DEFAULT
1 Reserved - - OFF
2 Hexadecimal HEXDUMP NORMAL OFF
3 Reserved - - OFF
4 Reserved - - OFF
5 Parallel mode UNIDIRECTION BIDIRECTION OFF
6 Reserved - - OFF
Baud rate selection
Transmission speed SW-7 SW-8 DEFAULT
Reserved - - OFF
Reserved - - OFF
Reserved - - OFF
Reserved - - OFF
DIP Switch Set 2 Functions
Print Density
Print Density SW-1 SW-2
Lower Power ON ON
Normal OFF ON
Normal ON OFF
Dark OFF OFF
Cutter
SW FUNCTIONS ON OFF Remarks
3 Cutter FULL CUT PARTIAL CUT Only Epson mode