Exabyte EXB-8205 User Manual
Page 15
3.
From the front of the computer, thread the SCSI
cable through the open drive bay, as shown in
Figure 6. Slide the tape drive into the bay until the
front of the drive is flush with the front of the drive
bay.
4.
Connect the SCSI cable to the SCSI adapter card in
your computer.
Figure 5
Attaching slide rails to the tape drive
Figure 6
Inserting the drive into the drive bay and connecting the
SCSI cable to the adapter card
May 1994
EXB-8205 and EXB-8505 (Standard and XL)
15