Stop, Play, 6 sel – Euphonix EuCon User Manual
Page 30: 7 assign, 8 rec, 9 auto, User guide surface controls 30
professional control surface
Artist Series
USER GUIDE
SURFACE CONTROLS
30
STOP
Press
STOP
to stop all other functions.
PLAY
Press
PLAY
to play the project from the current location.
REC
Press
REC
begin recording at the current location. All tracks armed for recording
are punched into record.
4.3.6
SEL
Pressing a fader’s
SEL key selects that track in the application and attentions
(see Channel Mode on page 34) it on the MC Mix.
NOTE: Some applications allow selecting multiple tracks if the Shift key on the work-
station is held down while selecting tracks. In this case, the attentioned track
is the last one selected.
4.3.7
ASSIGN
Press the
ASSIGN
key to display the Assign tab in the EuControl Settings dialog
(see Assign on page 48).
4.3.8
REC
Press the
REC
key to enable recording on a track. The
REC
key lights red to indicate
that track is enabled (armed) for recording. Press the
REC
key to cancel a track
enabled for recording.
NOTE: Some applications blink the
REC
LED when armed but not recording and light
solid when recording.
4.3.9
AUTO
To change an application track’s automation mode, press the
AUTO
key until the
desired automation mode appears in the channel display.