TA Triumph-Adler CX 8048 - Manual (Page 51)

3. 2 Service Call Errors
In case the following Error Codes for a serious failure appear in the screen;
PLEASE CALL YOUR TRAINED SERVICE PERSONNEL TO RESOLVE THE ERRORS.
No operation should be done by the customer.
Error Code Error Indication
E - 000 Fuser Low Temp
E - 001 Fuser Over Temp
E - 002 Fuser Low Temp
E - 003 Temp Not Rise
E - 010 Motor1 Error
E - 011 Motor2 Error
E - 012 Motor3 Error
E - 020 Counter Error
E - 031 1st Error
E - 032 AC Error
E - 033 Tr Error
E - 034 Bias Error
E - 040 Cutter Error
E - 050 FPGA Error
E - 070 Dev Error
E - 080
E - 081
Density Sensor Error
If any of the above errors appear:
1. Turn off CX 8048, and turn it on after an interval of 30 seconds or more.
2. If the same error code appears, turn off CX 8048, and then unplug the printer from
the wall outlet after an interval of two minutes for shutdown. Call your service personnel.
Chapter 3 Error Correction 3-12