beautypg.com

Installation instructions, Electrical connections, Electrical requirements – Electrolux CHI 950 User Manual

Page 11: Electrical connection

background image

11

INSTALLATION INSTRUCTIONS

It is dangerous to alter the specifi cations or attempt to modify this product in any way.

Technical Information
DIMENSIONS

HEIGHT OF CANOPY:

70 mm

HEIGHT OF CHIMNEY:

(UPPER SECTION) 415 mm

(LOWER SECTION) 740 mm

WIDTH OF CANOPY :

898 mm

DEPTH OF CANOPY:

650 mm

ELECTRICAL SUPPLY:

VOLTAGE:

220-240 V 50Hz

POWER CONSUMPTION:

285 W

FAN

MOTOR:

205

W

LAMPS : (4 x 20 W)

80 W

Note: CE Marking certifi es that this appliance complies with the requirements
laid down in EEC directive 89:336. (Electromagnetic compatibility) and
subsequent modifi cations and Low Voltage directive 72/23/E.

ELECTRICAL CONNECTIONS

Electrical Requirements

Any permanent electrical installation must comply with
the latest I.E.E. Regulations and local Electricity Board
regulations. For your own safety this should be under-
taken by a qualifi ed electrician e.g. your local Electricity
Board, or a contractor who is on the roll of the National
Inspection Council for Electrical Installation Contracting
(NICEIC).

Electrical Connection

Before connecting to the mains supply ensure that the
mains voltage corresponds to the voltage on the rating
plate inside the cooker hood.

This appliance is fi tted with a 3 core mains cable and
must be permanently connected to the electricity supply
via a double-pole switch having 3mm minimum contact
gap on each pole. A Switched Fuse Connection Unit to
BS1363 Part 4, fi tted with a 3 Amp fuse, is a recom-
mended mains supply connection accessory to ensure
compliance with the Safety Requirements applicable to
fi xed wiring instructions.

This appliance conforms to BS 800: 1988 and EEC
Directive No. 78 308 regarding suppression of radio and
television interference.

DOUBLE INSULATED DO NOT EARTH