Rose Electronics RackView 20 - Manual (Page 12)

Page
12
KVM Rack Drawer 20” WWW.ROSE.COM
Recall
Press the “menu” button to enter, and you will see:
Yes/ No
Select “Yes” button then ‘Menu” button to recall the factory setting.
Select “No “ to return to the previous page.
Exit
Press the “exit” button to quit OSD menu.
Power Indicator
• GREEN ON
• RED STANDBY
• RED SUSPEND
• RED OFF
Rear Panel Cable Connections
Depending on which Rackview model you have purchased, the rear panel layout could look like this.
1 = VGA connector
2 = PS2 keyboard connector
3 = PS2 mouse connector
4 = PS2<>USB Switch
5 = USB connector
6 = Audio line-in (optional)
7 = USB connector
8 = DVI-I connector
9 = IEC power socket
Configuring the Display Settings
After connecting the Rackview console and turning on your computer, you may need to configure one or
more of the following display settings:
• Display mode (also called desktop area or video resolution)
• Refresh rate (also called vertical scan rate or vertical sync)
• Color depth (also called color palette or number of colors)
Each video card has several controls that let you adjust the display settings. However, the software and
driver for each video card is unique. In most cases, you adjust these settings by using a program or utility
provided by the manufacturer of the video card.