Rose Electronics UltraVista LC II - Manual (Page 18)

OPERATION
UltraVista LC II Installation and Operations Manual 12
Using the built-in OSD features
To invoke the built-in OSD, press the MENU button on the front panel. The
OSD will display on the monitor connected to the DVI output port #1.
(Note: All cable connections and power must be applied.)
OSD Buttons
There are several On Screen Display (OSD) control buttons located on the
right side of the front panel. The figure below shows the arrangement of
OSD controls.

Power – Turns the video box On or Off.

Menu / Enter – Enters the OSD, selects items and sets the new values
entered.

Left – Moves the selection left.

Right – Moves the selection right.

Up – Moves the selection up

Down – Moves the selection down.

Auto / Exit – Exits from any menu.
OSD Lock
The OSD front panel buttons can be locked using the OSD Lock function.
To turn the OSD lock On and Off, push the Right and Auto / Exit buttons
simultaneously for a few seconds. The OSD display shows the current
status as locked or unlocked.