Rose Electronics UltraVista LC II - Manual (Page 17)

11 UltraVista LC II Installation and Operations Manual
Mounting the UltraVista LC II unit
The UltraVista LC II unit can be placed on a desk, or mounted on a
horizontal or vertical surface using the included mounting brackets. To
mount the unit using the mounting brackets, remove the four rubber feet and
secure the mounting brackets to the unit using the same holes and screws
as shown below.
Figure 9. Mounting Brackets
The installation location must be:

Centrally located so all cables can connect to the unit*

Out of direct sunlight

No items placed on top of the unit

On a firm surface or secured with the mounting brackets

Away from any moisture or liquids

Observe proper cable strain relief techniques
* If longer distances are needed from the UltraVista LC II to the video
source or to the display monitors, Rose Electronics’ video extender line
can support distances up to 400 feet using CATx cabling or 6 miles over
fiber cabling.
Connecting the cables
Refer to Appendix C for cabling options for the different video wall
configurations.