Rose Electronics UltraVista LC II - Manual (Page 15)

9 UltraVista LC II Installation and Operations Manual
Bezel compensation value calculation
When all the displays have been mounted, measure the bezel width and
height, and the viewable width and height as shown in figures 7 and 8.
These values will be entered into the OSD to set the gap compensation
which will produce a smooth transition from one display to the next.
Figure 7. Bezel calculation for VWL-B133FD
Bezel Viewable
Width Width
(mm) (mm)
Viewable
Height
Bezel
Height