Rose Electronics Vista Remote 2 - Manual (Page 37)

Vista Remote 2 Installation and Operations Manual 31
Configure miscellaneous
This menu allows you to change the maximum computer ports and scan time.
Figure 23. Configure Misc
Maximum ports:
The “Maximum ports” configuration allows you to change the total number of computer ports
that are in use. If your using an 8-port switch and only connecting 6 CPUs, changing the
maximum ports from 8 to 6 will skip computer ports 7 and 8 during the scan function. To
change the “Maximum Ports”, highlight the maximum ports and press to clear the field.
Type in the new value (1-8) and press .
Scan time:
This item sets the pause time during the scan function.
To change the “Scan time”, highlight the scan time and press to clear the field. Type in
the new value (1-16 seconds) and press .