Rose Electronics UltraConsole Remote 2 - Manual (Page 13)

UNIT CONFIGURATION
ULTRACONSOLE REMOTE 2 INSTALLATION AND OPERATIONS MANUAL 7
Configuring the UltraConsole Remote 2 IP Input module
 When you locally connect to the UltraConsole Remote 2 unit for the first time the Unit must be configured to
be compatible with your network.
 Follow the recommended procedure below to configure all models
 Make all cable connections to the KVM station and computers, connect to the network after the assigned unit
IP address has been entered and saved.
 Make sure power is applied to all devices (Computer, UltraConsole Remote 2, and Monitor)
 Make sure a computer is connected to CPU port #1 and that computer is powered on
If no computer is connected to port #1, the OSD menu screens may not sync
 With power applied, a standard login screen will display on the KVM monitor
 Login on to the unit using the default user ID, admin and no password
 After a successful login, the remote computer’s video will display on the KVM monitor
 Press the CTRL + ALT + C keys simultaneously to display the configuration menu options
as shown below:
Figure 2. Configuration Menu
Select “Unit Configuration” and the below screen will display
Figure 3. Unit Configuration Menu