RIGOL DG5000 Series - Manual (Page 33)

Characteristics and Specifications RIGOL
User’s Guide for PA1000 Series Power Amplifier 5-5
Slew Rate ≥80V/µs (typical) 【
Remark2
】
Overshoot <7%
Bias Voltage
Gained Error
5%±100mV
Others
Power Supply
DC 12V±5%, 4Apeak
Output Protection Output Overcurrent protection, internal
temperature abnormal protection
Working
Temperature 0 ℃～+35 ℃ 【
Remark3
】
Dimension( W×H×D) 142.2mm×48.1mm×215.4mm
Net Weight
850g±20g
【
Remark
1】
The Full-power bandwidth refers to the maximum frequency of
signal generated with undistorted and utmost amplitude in AC output state
from the Amplifier.
max
2 V
SR
FPB
π
=
SR: Slew Rate
Vmax: Maximum undistorted output amplitude
【
Remark 2】Slew Rate: When you send a large step signal to the amplifier,
the output slope of signal will be stable as a constant at some certain point; this
constant is named Slew Rate.
【
Remark 3】All above specifications are formed at 25 ℃, the working
temperature is between 0 ℃～+35 ℃. Reduce the output power and the
working frequency of PA1011 when the ambient temperature exceeds 35 ℃.