RIGOL DG5000 Series - Manual (Page 21)

Operations RIGOL
User’s Guide for PA1000 Series Power Amplifier 2-1
Chapter 2 Operations
How to Set the Output Status
See Figure 2-1, there are four groups of button on the panel, which
separately represents a set of status parameter. Choose the one
you want from each group and click “Send” to transmit these new
settings into PA1011.
Figure 2-1 Control Panel
For the details of each selection on the control panel of PA1011, see
table below:
Button Setup Explanation
Gain X1, X10
Sets the output gain. The input range of signals
is different in different gain setting.
Polarity
Invert
Normal
Sets the desired output polarity.
DC Offset ON, OFF Turns on/off the offset setting.
ON-OFF ON, OFF Enables or disables the output.