RIGOL DG5000 Series - Manual (Page 32)

RIGOL Characteristics and Specifications
User’s Guide for PA1000 Series Power Amplifier 5-4
Specifications
All specifications listed in the table below can be met under
following two conditions unless where noted:
 The instrument has been continuously operated for 30 minutes
at the stated temperature.
 All the specifications are guaranteed except for the one marked
“typical”.
Signal Input
Input Impedance
50kΩ
Internal Bias
(equivalent at the
output terminals) +/-12V
External Input +/-10Vmax (Gain: X1)
+/-1.25Vmax (Gain: X10)
Amplifier
Working Mode
Constant Voltage
Gain Switching in 10V/1V and 10V/10V (DC
Gain error: <5%)
Polarity Switching Normal/Invert
Virtual Value of Sine
Output Power
(RL=7.5Ω) 10W (typical, input: Sine, 100kHz, X10)
Output Voltage 12.5Vpeak (output: Sine, 100kHz)
Output Current 1.65Apeak (input: Sine, 100kHz)
Output Impedance <2Ω
Full Power
Bandwidth DC~1MHz [Remark1]