Duct simulator, Simulator duct leakage to outdoor, Setup duct simulator – Retrotec House and Duct Simulator User Manual

Page 4: Optional parts

Bookmark our blog! Everything from new testing

techniques to industry updates.

Our tech support is always ready to field phone-in

troubleshooting and testing questions. Give us a call or email.

Access all Retrotec training videos here:

Page 4 of 4

Duct Simulator

□

To simulate a Duct Leakage to the Outdoors test,

attach the Duct Leakage Simulator to one side of the

tent. Open the slider between the house and duct

simulator to create the leakage to the outdoors.

Simulator Duct Leakage to Outdoor

DucTester

Part #: DFDU159

Setup Duct Simulator

To practice duct testing, you will need the Duct Simulator

with adjustable sliders to simulate the holes in the ducts

and your DucTester.

□

Attach the Flex Duct to the

Flange on the simulator

using the velcro strap.

□

Connect the other end of

the Flex Duct to the

DucTester. For pressurization,

connect to the exhaust

(outlet) side of the DucTester

so air blows into the duct.

For depressurization,

connect to the inlet side of the DucTester over top of

the Range Rings so air blows toward you.

Tubing Accessory Kit

35 ft (10 m) of blue, red, yellow and green 1/4 inch

(12mm) outside diameter tubing. Static Pressure Probe,

4 inch (100 mm) x 1/8 inch (6 mm) outside diameter

metal probe, 2 T and 2 male-to-male connectors. Red L

for duct leakage to outdoors test.

Part #: TU119

Flow Hood

24 x 24 inches

(61 x 61 cm)

Part #: PP105

Optional Parts

Flange to connect

Flex Duct to
register

Part #: DU157

Verification

Plate

Part #: DU159

Grill Mask 12in x 216ft,

12in perfs,

Hi-stick Blue,

Single Roll

Part #: GR116

Part #: GR117

(for case of 3)

Umbilical for

DucTester

fans, 7ft (2 m)

Part #: DM240

Mid-Range Ring &
Low-Range Ring

(Mid) Part #: DU154

(Low) Part #: DU155

We’re here to help!

retrotec.com/residential/SupportCenter/SetupWebinars.aspx

retrotec.com/blog.aspx

1-855-738-7683

[email protected]

youtube.com/RetrotecTraining

12.5ft (3.8m)

Flex Duct for

DucTester

Part #: DU161

Inlet with Range

Rings inside Flex Duct

Exhaust

depressurize

airflow

pressurize

Inlet

airflow

Exhaust