RISCO Group Lumin8 - Manual (Page 11)

LuMIN8 Installation Instructions 11
Technical Specification
Single Piezo Twin Piezo
Input DC Power Regulated 13.0- 14.2V
Quiescent Current 23mA 23mA
Sounder current 350mA (Regulated) 450mA (Regulated)
Sounder current (Quiet mode) 150mA 180mA
Strobe current 10mA 10mA
Battery charging current 15mA
Speaker Sound level 111dbA 114dbA
Strobe light Surface Light Technology SMT LED
Strobe lens Polycarbonate, available in amber, red or blue
Strobe flash rate 60 times per minute (maximum)
Back-up battery (rechargeable) Ni-MH rechargeable 8.4V, 280mA/h
Ingress Protection IP65 (For encapsulated PCB),
IP44 (For other sounder components),
IK 08
Operating Temperature -25°C to 60°C (-13°F to 158°F)
Humidity 95% maximum
Lumin8 Dimensions (W x L x H)
Lumin8 Delta Dimensions (W x L x H) 74mm x 273mm x 230mm
50mm x 277mm x 236mm
Compliance EN50131-1 Grade 3 Environmental Class IV