RISCO Group Wireless 2-Way Slim Keypad - Manual (Page 2)

Full-Function Mode
User Operations
The following list details the user operations from the 2-way wireless slim keypad in a full
functional mode. User operation can be de ned to be activated by a quick mode or high
security mode that requires the use of a code or proximity tag. In the high security mode
the proximity tag can be used as a substitute for inserting a user code when prompted
to insert a code.
* Note: When using the proximity tag, the keypad needs to be woken up before
operation
g g g g
Common Operations:
Operation Quick High Security Mode 1
Full Set Press Press > Code 2
Part Set 3 Press Press > Code 2
Unset Press > Code or proximity tag (after wakeup)
Partition 1/2/3 setting Select partition 1/2/3 Select partition 1/2/3 and
(Full) and press press followed by Code
2
Part set partition 1/2/3
Select partition 1/2/3 Select partition 1/2/3 and
and press press followed by Code 2
Partition Unset Select partition 1/2/3 and press followed by Code 2
Panic alarm Press buttons + simutaneously for 2 seconds
Fire alarm Press buttons + simutaneously for 2 seconds
Emergency/Med. alarm Press buttons + simutaneously for 2 seconds
System Chime On/Off 6 Press the button for 2 seconds
Main unit speaker
Press the button for 2 seconds.
volume 6 Select the volume level (0=No sound, 4= full volume)
Press to save your selection
Set keypad exit/entry Press the button for 2 seconds to toggle
beeps
6 between On/Off
Activate/Deactivate Press the button for 2 seconds to toggle
light sensor
4 between On/Off
Press the button Press the button for 2
Status request for 2 seconds for system seconds followed by code
2
for
status message 6 system status message 6
and view LED display and view LED display
Outputs Control Press 1/2/3 for 2 Press 1/2/3 for 2 seconds
seconds followed by code
2
Ring local door bell 5 , 6 Press the button to activate a door bell sound
on the main system.
Wake up keypad Press
Notes:
1. Consult your engineer for the operations de
¿ned with a code.
2. The proximity tag can be used instead of code.
3. For Part Setting with no entry delay press the key for two seconds.
4. Light sensor is used to save battery by turning on/off the keypad backlight.
5. Needs to be de
¿ned by your engineer.
6. Not applicable to LightSYS
Advanced Operations:
Bypass Unit Mode (Not applicable to LightSYS)
For units con ¿gured by engineers as being in bypass mode, the actions keys
are disabled and the keypad is used only to authorize an opening of an
exit/entry door. The following explanation details the user operations from the
2-way wireless slim outdoor keypad in bypass unit mode.
User Operation
When the system is set, a user must get access using the keypad to open
the door. Opening a door without an approval from the main unit will cause an
immediate intruder alarm.
Granted Access to Open Entry Door
1. Before opening an entry door enter an authorized code
a in the keypad or
wake up the keypad by pressing and present a proximity tag b .
2. Once access is granted (Green Led On) the user has a time windowc to
open the front door.
3. Once the front door is opened entry time will start in which the security
system needs to be unset.
Notes:
a. Bypass code can be unique or the same code as the security code.
Ask your engineer for the code de
¿nition.
b. An incorrect keypad code entered ¿ve times locks it for one minute.
c. Ask your engineer for the de ¿ned time window.
Replacing Batteries
1. Remove the unit from the wall (2)
1
.
2. Remove the battery compartment cover screw located at the bottom of the
cover by turning screw counter clockwise (4).
3. Pull up the battery compartment cover.
4. Pull out the batteries and replace them with new ones. Pay attention to the
polarity when inserting the new batteries.
5. Close the case (5A) and secure the screw to its place (5B).
Note:
1. A tamper alarm may result. Inform your alarm company before replacing batteries
CAUTION: Risk of explosion if battery is replaced by an incorrect type.
Dispose of used batteries according to local regulations.
Changing Keyword Parameters
Any change performed in the de
¿nition of the keypad parameters requires
updating the keypad as well. This is performed by pressing the key for 2
seconds. Doing so, the panel will send an update to the keypad.
Technical Speci ¿cation:
Electrical
Battery Type CR123, 3V lithium battery (x 2)
Current Consumption Stand-by current 10 —A, Max current 100 mA
Frequency 868.65 MHz, 433.92 MHz (model dependant)
Modulation Type 00K
Typical Battery Life 3 Years
Physical
Dimensions (HXWXD) 100 mm X 45 mm X 25 mm (3.9 i X 1.8 X .98 inches)
Weight (incl batteries) 0.157 kg
Environmental:
RF Immunity According to EN50130-4
Operating termperature -40 o C to 70 o C (-40 o F to 159 o F)
Storage temperature -40 o C to 70 o C (-40 o F to 159 o F)
IP Rating 65 (1P model only)
RISCO Group and its subsidiaries and af ¿liates ("Seller") warrants its products to be free from defects in
materials and workmanship under normal use for 24 months from the date of production. Because Seller
does not install or connect the product and because the product may be used in conjunction with products
not manufactured by the Seller, Seller cannot guarantee the performance of the security system which uses
this product. Seller's obligation and liability under this warranty is expressly limited to repairing and replacing,
at Seller's option, within a reasonable time after the date of delivery, any product not meeting the speci
¿cations.
Seller makes no other warranty, expressed or implied, and makes no warranty of merchantability or of ¿tness
for any particular purpose.In no case shall seller be liable for any consequential or incidental damages for breach
of this or any other warranty, expressed or implied, or upon any other basis of liability whatsoever. Seller's
obligation under this warranty shall not include any transportation charges or costs of installation or any liability
for direct, indirect, or consequential damages or delay. Seller does not represent that its product may not be
compromised or circumvented; that the product will prevent any personal injury or property loss by burglary,
robbery,
¿re or otherwise; or that the product will in all cases provide adequate warning or protection. Buyer
understands that a properly installed and maintained alarm may only reduce the risk of burglary, robbery or ¿re
without warning, but is not insurance or a guarantee that such event will not occur or that there will be no personal
injury or property loss as a result thereof. Consequently seller shall have no liability for any personal Minjury,
property damage or loss based on a claim that the product fails to give warning. However, if seller is held liable,
whether directly or indirectly, for any loss or damage arising under this limited warranty or otherwise, regardless
of cause or origin, seller's maximum liability shall not exceed the purchase price of the product, which shall
be complete and exclusive remedy against seller. No employee or representative of Seller is authorized to
change this warranty in any way or grant any other warranty.
WARNING: This product should be tested at least once a week.
CAUTION: risk of explosion if battery is replaced by an incorrect type.
Dispose of used batteriess according to local regulations.
RISCO Group Limited Warranty