Primare MM30 media board User Manual
Page 8
Primare App User Guide
PlAyInG MUsIC fRoM An IPod
•
Connect the iPod, iPhone, or iPad to the USB-A input on the MM30,
NP30, or PRE60, using an iPod USB lead.
You can then browse through the music on the iPod and select what you
want to play.
See Browsing tracks, page 5, for information about browsing and searching
for music on an iPod.
My Files on the Select Source screen will show the music on your device
and allow you to play it over Wi-Fi.
PlAyInG MUsIC fRoM A dIGItAl oR AnAloGUE
InPUt
•
Connect the source to the appropriate digital or analogue input on your
preamplifier.
•
Touch the entry corresponding to the input on the Select Source screen.
You can now play music from the chosen input.
PlAyInG MUsIC fRoM A PC/MAC
On a PC:
•
Install the Primare PC audio driver from the support section on:
www.primare.net
No driver is needed on a Mac.
•
Connect the PC/Mac USB connector to the USB-B input on the MM30,
NP30, or PRE60, using a USB-A to USB-B lead.
•
Select XMOS USB Audio 2.0 in the Sound Output Control Panel or
System Preferences panel.
•
Touch PC on the Select Source screen.
You can now pay music from your PC/Mac, using the MM30, NP30, or PRE60
as the soundcard of your PC/Mac.