Primare MM30 media board - Manual (Page 10)

Primare App User Guide 10
nEtwoRk
The Network screen displays a summary of the current network settings,
and provides the following MM30, NP30, or PRE60 settings:
Configure WiFi Displays the WiFi Configuration screen to allow you
to configure the Wi-Fi settings; see below.
Configure LAN Displays the IP Configuration screen to allow you to
configure the Ethernet settings; see below.
Device Name Allows you to assign a name to your Primare device.
• Touch Restart to restart the MM30, NP30, or PRE60 following a change
to the network settings.
IP ConfIGURAtIon
The IP Configuration screen provides the following MM30, NP30, or PRE60
settings:
DHCP Enables or disables DHCP for the device. If DHCP
is enabled, the other settings will be managed
automatically by the network protocol.
IP Address The IP address of the MM30, NP30, or PRE60.
Subnet Mask The IP Subnet Mask.
Gateway The static default gateway address.
Primary Server The static primary Domain Name Server.
Secondary Server The static secondary Domain Name Server.
wIfI ConfIGURAtIon
The WiFi Configuration screen provides the following MM30, NP30, or
PRE60 settings:
SSID The name of your wireless network.
Security The type of wireless encryption used by the system. The
options are: None, WEP, WPA, or WPA2.
Cipher The type of WPA encryption that is used. The options are
TKIP, AES, or TKIP/AES.
Password The WiFi password.