Primare SPA23 av integrated amp - Manual (Page 9)

s P A 2 3 u s e r g u i d e
Option Description
AV DELAY Can be adjusted between 0ms
and 140ms to compensate for
processing delay in some displays.
AUTO
LIPSYNC Allows you to turn off the default
audio delay on the HDMI inputs,
which is added to compensate for
the video processing time. This is
useful in dual-HDMI configurations.
2CH MODE The default surround mode for
two-channel sources: BYPASS,
STEREO, PLIIX MOVIE, PLIIX
MUSIC, NEO6 CINEMA,
NEO6 MUSIC, or PARTY.
V i d e o A d J u s t
The VIDEO ADJUST menu allows you to
specify advanced video input settings:
• Use the INPUT option to select the input
you want to edit.
The menu then shows the current settings for that
input and allows you to edit them.
Option Description
ALIAS See To edit an input alias on
the previous page.
ASPECT RATIO Set to 16:9 or 4:3 to specify
the display aspect ratio.
DEINTERLACING Specifies how a 480i, 576i, or
1080i source is deinterlaced.
FILM is for 24p film,
VIDEO is for 50Hz or
60Hz video, and AUTO
selects the correct option
based on the input signal..
PrEP Select AUTO to select
Progressive ReProcessing to
clean up poor source video
processing, or DISABLE to
disable it.
Option Description
1:1 FRAME RATE Set to ON to set the output
frame rate to the input
frame rate, which may cause
stuttering, or OFF for a
fixed output frame rate.
UNDERSCAN Set to 0 to 20 to shrink
the picture to adjust for an
overscanned source..
BRIGHTNESS,
CONTRAST,
COLOR
SATURATION,
HUE (TINT) Set to 100 to -100, default
0. Allow you to adjust the
color characteristics of the
image.
DETAIL/EDGE
ENHANCEMENT, Set to 100 to -100, default
0. Allow you to accurately
adjust the sharpness of the
picture..
MOSQUITO NR Set to DISABLE, ON-
LOW, or ON-HIGH to
reduce the compression
artifacts in digitally
compressed signals, like cable,
satellite and internet-based
video.
A u d i o s e t t i n g s
The AUDIO SETTINGS menu allows you to
specify options affecting all audio outputs:
Option Description
INT AMP The normal setting is FRONT.
Can be set to BACK to change
the front power amplifier to
operate with the Surround Back
channels, if you prefer to use a
separate power amplifier with
the front channels.
LATE NIGHT Set to ON to apply dynamic
range compression to the audio,
to reduce loud transients for late
night listening.
DOUBLE BASS Set to ON to copy the bass
from speakers specified as
LARGE and send this to the
subwoofer.
LFE LEVEL Can be adjusted between 0.0dB
and -10.0dB to reduce the LFE
level.
VOLUME
DEFAULT Determines the default volume
(0 to 99) when the SPA23 is
turned on from standby.