Primare SPA23 av integrated amp - Manual (Page 5)

s P A 2 3 u s e r g u i d e
5
using the sPA23
This page explains how to operate your SPA23, using the functions available from
the front panel or C24 remote control.
f r o n t P A n e l
c o n t r o l s
Almost all the functions of the SPA23 Multi-
Channel Processor can be accessed using the two
front panel controls and four push buttons, and
information about its operation is displayed on the
front panel display:
Selector
Selects an input, or operates the on-screen menus
Menu @
Selects the on-screen menus.
Select R
Selects the current menu option.
Level _
Selects which setting you change with the
VOLUME control.
Mute/Standby O
Press briefly to mute the sound.
Hold down to switch the SPA23 to standby.
Volume
Adjusts the volume.
f r o n t P A n e l d i s P l A y
The front panel display shows:
• The processing mode; eg STEREO, or NO
LOCK if there is no signal on a digital input.
• The current source; eg DVD
• The volume; eg 41 or MUTE.
To blank the front panel display
•
Press the DIM button on the remote control.
The normal display will reappear while you adjust
any settings.
Press the DIM button again to restore the display.
s W i t c h i n g o n A n d
o f f
To switch on
• Use the switch on the back panel.
During normal operation you can leave the SPA23
switched on and in standby.
To switch to standby
• Hold down the O button on the front panel
or remote control.
To switch on from standby
• Press the O button on the front panel or
remote control.
s e l e c t i n g A s o u r c e
The SPA23 allows you to define up to 15
sources. Each source can use one of the six
digital and eight analog inputs, and any source
can be combined with one of the HDMI inputs.
Alternatively, a multi-channel source, called
EXT 7.1, can be defined using analog inputs 5 to 8.
When the SPA23 is first supplied the seven
standard sources shown in the table below are
already set up for you.
You can simply disable any of these sources that
you do not need; see
Input setting, page 8. You
can also change any source to use different inputs,
or configure your own sources with any name
you choose and using any particular inputs as
appropriate for the source.
To select a source
• Turn the SELECTOR control on the front
panel until the name of the source is shown
on the front panel display.
• Alternatively, press the A or V buttons on the
remote control to step between sources.
c h A n g i n g t h e V o l u m e
The SPA23 allows you to vary the volume from 0
(silence) to 99 (maximum volume).
To change the volume
• Rotate the VOLUME control on the front
panel, or press the VOL + or VOL – buttons
on the remote control.
The current volume setting is shown on the front
panel display.
Input Source Audio Video 2CH mode Description
1 Blu-ray HDMI 1 HDMI 1 Stereo Blu-Ray disc player
2 DVB HDMI 2 HDMI 2 Stereo Digital satellite receiver
3 Games HDMI 3 HDMI 3 Stereo Game console
4 Server HDMI 4 HDMI 4 Stereo Streaming server
5 DVB-T HDMI 5 HDMI 5 Stereo Digital television receiver
6 CD Analog 1 None Bypass CD player
7 SACD Ext 7.1 None Stereo SACD player