beautypg.com

Primare SPA23 av integrated amp User Manual

Page 10

background image

s P A 2 3 u s e r g u i d e

1 0

V i d e o o u t P u t

The VIDEO OUTPUT menu allows you to
customise the HDMI output settings.

For each output you can set:

Option

Description

RESOLUTION

Set to PASS-THRU, AUTO,
480p/576p, 720p, 1080i,
1080p, or 1080p24.

COLOR SPACE Set to AUTO, RGB for a

Red, Green, Blue color space
standard using 8 bits per
primary color, YCbCr 422 for
10-bit component, or YCbCr
444
for 8-bit component.

COLORIMETRY Determines how RGB is

converted to YCbCr: AUTO,
ITU.601 for Standard
Definition video formats, or
ITU.709 for High Definition
video formats.

OUTPUT VID
LEVEL

Set to VIDEO for levels
suitable for a TV, or PC for
levels suitable for a computer
display.

You can also set the following settings that apply
to both outputs:

Option

Description

DEFAULT FRAME
RATE

Set to 50p (PAL) or 60p
(NTSC) to specify the native
system of your display.

TESTPATTERN

Displays one of a set of
alternative test patterns for
aligning projection displays.

s P e A k e r s e t t i n g

The SPEAKER SETTING menu allows you to
set up the speakers:

Option

Description

MODE

See below.

FRONT L+R

Select SMALL or LARGE
to specify whether the front
speakers can handle bass.

CENTER

Select NONE, SMALL, or
LARGE to specify whether
there is a center speaker in the
system, and whether it is small
or large.

SURROUND

Select NONE, SMALL, or
LARGE to specify information
about the surround speakers.

SURR BACK

Select NONE, 1/SMALL,
1/LARGE, 2/SMALL, or 2/
LARGE
to specify the number
and size of the surround back
speakers.

SUBWOOFER

Select OFF or ON to specify
whether the layout should
include a subwoofer.

LR+LFE XOVER
CENTER XOVER
SURR XOVER

Allows you to define the
crossover frequency (40Hz
to 200Hz) used for the LFE,
CENTER, and SURR speakers.

Set MODE to GENERAL, and then set

the other parameters as appropriate for the
speakers in your system.

You can then define DOLBY D, DTS, and
OTHER modes, which can be used to add an
offset to the GENERAL settings for Dolby
Digital, DTS, and 2-channel sources respectively.